Tekno RC is happy to announce the signing of Ryan Lutz to the factory driver team. Over the years we have built up an arsenal of professional level RC vehicles that push the envelope of performance, value, and durability. Our focus on responding to customer needs and requests is unprecedented. We created a unique team […]
Posts Tagged ‘Tekno RC’
Tekno RC SCT410 4×4 Short Course Truck Review
December 11th, 2013 
Jarodd As a die hard Team Associated guy deciding to run the Tekno SCT410 took some thought. Once I did some research on the truck and saw local and national race reports it was a no brainer. Pros and local racers were winning with it all over the country in box stock form. I had been […]
Posted in featured, Product Reviews 
Tags: CRC Raceway, SCT410, Team CRC, Tekno RC 
Comments Off on Tekno RC SCT410 4×4 Short Course Truck Review
Tekno RC dominates the PRO4 and 1/8th E-Buggy in SoCal’s racing scene
August 20th, 2013 Matt The Tekno RC team has had a busy weekend here in southern California attending both Round 6 of the JBRL and Round 4 of the Top Notch Series. Rainman’s Hobby and Raceway was host to the JBRL where Tekno driver Barry Baker drove to a well deserved first place finish with his Tekno SCT410. In […]
Posted in Racing News Tags: Tekno RC Comments Off on Tekno RC dominates the PRO4 and 1/8th E-Buggy in SoCal’s racing scene
Tekno RC EB48.2
August 15th, 2013 Matt Tekno RC’s presence in the 1/8th E-buggy class has been steadily growing since the release of the EB48 in August of 2012. Now we are introducing an updated EB48.2 buggy that is not only more competitive, but also represents the best value in the marketplace. Tekno RC has improved performance and durability without increasing the […]
Tekno RC – New Rear Gearbox, Aluminum Servo Horns, and Hex Adapters
August 9th, 2013 Matt Check out some new hotness from Tekno RC! Tekno RC is proud to announce a new rear gearbox option for the EB48 and SCT410 (TKR5016B). This new gearbox is slightly angled upward to minimize the drive angles and increase efficiency. Furthermore, this helps to reduce wear on the driveshaft for increased longevity. New larger […]
Posted in RC News Tags: Bearings, gearbox, Servo horns, stub axles, Tekno RC Comments Off on Tekno RC – New Rear Gearbox, Aluminum Servo Horns, and Hex Adapters
Tekno RC HD Servo Saver Spring
June 25th, 2013 Matt Tekno RC is happy to release its new HD Servo Saver Spring (TKR5101X). This spring is a direct upgrade for the EB48 and the SCT410. The Servo Saver Spring is stiffer than its stock counterpart giving your steering more precision while still having the comfort of saving your servo. TKR5101X DESC: Servo Saver Spring (HD, […]
Tekno RC +1.5 Degree Rear Hinge Pin Brace and additional hardware
June 15th, 2013 Kevin Tekno RC is offering a new Rear Hinge Pin Brace with an additional 1.5 degrees of toe compared to the stock part. The new brace is CNC machined from 7075 aluminum, then gun metal anodized for wear. It is a direct fit on all Tekno RC 1/8th scale vehicles and will give you the option […]
Tekno SCT410 4×4 Short Course Build Up
June 4th, 2013 Jarodd Following the conclusion of the carpet indoor season at CRC Raceway in Rome, NY I started thinking of what classes I would run for the summer. I knew I would continue 2wd Short Course, but I needed another. I have always ran two. I toyed with returning to 1/8 nitro buggy after running it for […]
Tekno RC’s Chad Panek clinches JBRL Round 3
May 30th, 2013 Kevin This past weekend Pegasus Hobbies played host to the 2013 JBRL Electric Series Round 3. The series has always had a huge following and the turnout was no disappointment. Tekno RC driver Chad Panek faced down the competition in both the 1/8th electric buggy class and the highly competitive Pro4 SC class. First up was […]
TEKNO RC RELEASES CARBON FIBER SHOCK TOWERS AND MORE
April 25th, 2013 Kevin Always looking to improve the performance of their vehicles, Tekno RC is proud to release more upgrades for the SCT410 and EB48. Tekno RC’s carbon fiber shock towers are made from the highest quality materials. At 4mm thick for the rear (TKR5029C) and 5mm thick for the front (TKR5028C) these shock towers will withstand the […]
