Two Avid RC Releases on this Tuesday Xray T4 ’15 Aluminum Chassis The Xray T4 ’15 Aluminum Chassis is loaded with several unique features. We recommend using this chassis to increase performance on high to medium bite conditions. We will have limited quantities available for sale at 2015 Mile High Indoor Champs for those that […]
Posts Tagged ‘T4’
JConcepts Aluminum Front Suspension Brace – SC10, B4, T4
October 18th, 2013 
Matt Front-end protection is critical on all R/C vehicles. JConcepts is once again on task with the release of the aluminum front suspension brace for the Team Associated B4, T4 and SC10 line of vehicles. The all aluminum machined and anodized brace is spot on in terms of geometry, fit, finish and position. The edging has […]
JConcepts Aluminum shock bottom pivot ball set
October 18th, 2013 Kevin JConcepts adds front and rear shock bottom pivoting geometry parts to the hefty accessory line-up for the Team Associated line of vehicles. As racing circuits take on slightly more demanding conditions, it’s only natural for the vehicles to be under heavier duress. It’s somewhat common for the rear shock to become loose as time goes […]
New DE Racing Chassis Brace for Team Associated B4, T4, & SC10
September 19th, 2013 Kevin New from DE Racing, a Chassis Brace for Team Associated B4, T4, & SC10 race vehicles, the product that maximizes your racing dollar by increasing the life and durability of your Team Associated race vehicle while maintaining its sleek stock appearance. This brace keeps your vehicle on the track and out of the pits, virtually […]
XRAY Low-friction Kevlar® Drive Belts
September 6th, 2013 Kevin XRAY has just announced new Kevlar drive belts for their T4 car. Optional specially-modified high-performance Kevlar®-reinforced drive belts. This belts are very thin and elastic as possible for an extremely effective transmission that dramatically reduces friction and increases performance. To fully enjoy the benefits from these high-performance belts, be sure all transmission ball-bearings are clean […]
AVID Associated Motor Centering Set with Long Aluminum Topshaft
August 8th, 2013 Kevin In an effort to further optimize the Associated B4.2, T4.2 and SC10.2, AVID introduces the Associated Motor Centering Set. The B4.2 and related platforms are all heavy on the left rear, which also make an imbalance on the front tires. By shifting the motor, motorplate, and slipper 5mm towards the right, the balance is restored […]
JConcepts new AE Ball-cup assortment – Rib and Wedge style
August 3rd, 2013 Kevin Tie-rod ends on 1/10th vehicles are under serious duress and with the ever evolving racing surfaces and layouts, a heavier duty design is required. JConcepts has gone to the drawing board and designed 2 different ball-cups which compliment the Team Associated assortment of vehicles. Ball-cups pop on and off as a requirement of their base […]
AVID Associated Carbon Fiber ESC Shelf with Standoffs
July 29th, 2013 Kevin The AVID Carbon Fiber ESC Shelf takes conventional ideas one step further with our innovative slotted design. The AVID design team created a versatile system that works with both stick and shorty battery pack types, as well as allowing for all popular battery brands/models. Racers can buy the ESC shelf “a la carte” or buy […]
JConcepts- B4, T4 & SC10 2.5mm carbon fiber steering rack
July 23rd, 2013 Matt It’s hard to make an improvement to the race proven B4.2 buggy. However, JConcepts has pulled another option out from under their design sleeves with a genuine Carbon Fiber steering rack and hardware kit. In the stock trim, the B4.2 steering swings a molded plastic steering rack supported by bushings. The JConcepts alternative uses the […]
Posted in RC News 
Tags: B4, Carbn Fiber, jconepts, sc10, Steering rack, T4 
Comments Off on JConcepts- B4, T4 & SC10 2.5mm carbon fiber steering rack
JConcepts – SC10, T4 (F&R) and B4 (rear) anti-roll bar kit
June 26th, 2013 Matt Control is everything and especially in truck racing where the center of gravity is high and the trucks are narrow in width. Having a stable and race-able platform is the key to success and JConcepts has made that easier for racers with a Team Associated SC10, T4 or B4 vehicle. The JConcepts anti-roll-bar kit is […]
