The SC10B, SC10.2 & T4.2FT have new, gull-wing style front A-arms that have had RPM customers contacting us for help. This new shape has been less durable than RPM customers require. The RPM A-arm design eliminates the gull-wing shape in favor of a straight A-arm design with a lowered shock mount position (the shock slips […]
Posts Tagged ‘rpm’
RPM Front Bulkhead for the Traxxas Slash LCG 4×4 Chassis & 1/10th scale Rally
October 4th, 2013 
Matt Designed from the ground up, the RPM Low Center of Gravity front bulkhead for the Traxxas Slash 4×4 & 1/10th scale Rally is here to solve several key issues reported to RPM by our customers. First, we split our design into two pieces, making maintenance a much simpler task. With the RPM design, the front […]
RPM Front A-arms for the Associated ProLite 4×4
September 19th, 2013 Kevin Also fits the Thunder Tiger Tomahawk ST & SC as well as the Sparrowhawk XT & XXT. RPM front A-arms for the Associated ProLite 4×4 and Thunder Tiger Sparrowhawk / Tomahawk series of vehicles were designed to add some much needed strength and durability to these vehicles. RPM A-arms are manufactured using our trademark blend […]
Posted in RC News 
Tags: Associated, ProLite, rpm 
Comments Off on RPM Front A-arms for the Associated ProLite 4×4
Road to Vintage Nats: Associated RC10 Reboot
September 1st, 2013 Kevin Alright folks. This is Part 2 of my original RC10 Restoration article from WAY back in January. That article also has a lot of info about the Vintage Off-Road Nationals that all these builds are centered around. This really isn’t a part 2 though, because I pretty much scrapped that whole project. I kept a […]
Posted in Build Ups, featured, Projects Tags: A&l, Associated, crc, FastEddy, hobbywing, Lunsford, Murfdogg, Pro-line, rc10, restoration, Road to Vintage Nats, rpm, savox, Team Associated, Vintage, Vintage Off-Road Nationals 1 Comment »
RPM Front A-arms and Bulkhead for Associated B4, B4.1 & B4.2
July 18th, 2013 Kevin RPM A-arms for the Associated B4, B4.1 & B4.2 were designed to solve several customer-related complaints about the stock A-arms. Foremost is durability. Our B4 front A-arms are designed to withstand some serious abuse! We’ve redesigned the entire front end, replacing the stock front bulkhead with a version that helps spread impact forces over a […]
Front Bumper & Skid Plate for the Durango DESC410R, DESC410v2 & DESC410Rv2
June 17th, 2013 Kevin 73682 Front Bumper & Skid Plate for the Durango DESC410R, DESC410v2 & DESC410Rv2 The RPM Front Bumper and Skid Plate for the Durango DESC410R series of trucks adds a level of protection unmatched by any other bumper presently available. Our front bumper is wider than the stock bumper, protecting sections of the inner A-arms and […]
Posted in RC News Tags: DESC410R, DESC410Rv2, DESC410v2, Durango, rpm, Team Durango Comments Off on Front Bumper & Skid Plate for the Durango DESC410R, DESC410v2 & DESC410Rv2
RPM Heavy Duty Rear A-arms for the Traxxas Bandit
January 9th, 2013 Kevin RPM Rear A-arms for the Traxxas Bandit are finally here to strengthen the rear end of these already tough 1/10th scale buggies. RPM rear Bandit A-arms incorporate stock suspension geometry yet are vastly stronger and much more aesthetically pleasing than stock A-arms. Additionally, we’ve beefed up the hinge pin bosses by roughly 20% while reducing […]
RPM A-arms for the Axial EXO Terra Buggy
September 24th, 2012 Joseph RPM is branching out and touching on new manufacturers for our line of aftermarket parts. Based on consumer response they feel the Axial EXO Terra Buggy should be a great candidate for a new line of parts from RPM. They are starting this line-up with a set of front and rear a-arms. These a-arms are […]
Posted in RC News Tags: A-arms, Axial, EXO Terra Buggy, rpm Comments Off on RPM A-arms for the Axial EXO Terra Buggy
RPM Rear Bumper & Mud Flaps for Losi Ten-SCTE
April 25th, 2012 Kevin Check out this new release from RPM. RPM is proud to offer our new Rear Bumper for the Losi Ten-SCTE. Aesthetically, it’s the best looking bumper made for this awesome 1/10th scale truck, yet incorporates design elements to make it one of the strongest bumpers available! In comparison to a stock rear bumper, we moved […]
Losi SCTE Front Bumper & Skid Plate from RPM
March 20th, 2012 Kevin The RPM Front Bumper and Skid Plate for the Losi Ten SCTE adds a level of protection unmatched by any other bumper presently available. The RPM Front Bumper mounts further back along the chassis than the stock bumper, covering the entire front end left exposed by the stock bumper, protecting the aluminum chassis from abrasion […]
