RC8.2 Hard Anodized Shock Towers AV1807 RC8.2 Hard Anodized Aluminum Shock Towers have arrived for the die-hard AE drivers. These towers provide you with the all the trick modifications that the pros are using and that guy that beat you last weekend. No more having to drill out inserts to get that camber link mod* […]
Posts Tagged ‘rc8.2’
Avid RC RC8.2 Hard Anodized Aluminum Shock Towers
October 14th, 2013 
Matt 
Posted in RC News 
Tags: Avid RC, rc8.2, Shock towers 
Comments Off on Avid RC RC8.2 Hard Anodized Aluminum Shock Towers
JConcepts RC8.2 Silencer body
April 24th, 2013 Matt JConcepts, out to Silence the competition in Buenos Aires, Argentina, debuts new Silencer body design at IFMAR World Championships. Leading up to the 2012 IFMAR World Championships the JConcepts design team was extremely busy developing new product for the world level bi-annual event. The team spent many hours in development with leading team drivers to […]
Posted in RC News Tags: Jconcepts, rc8.2, Silencer, Team Associated Comments Off on JConcepts RC8.2 Silencer body
Pro-Line March 2013 NEW RELEASES
March 24th, 2013 Matt Pro-line Racing has a few new releases for March. Check them out below. For more information visit their website at prolineracing.com. Pre-Painted Flo-Tek Body This is a Painted and Partially Trimmed/Stickered Short Course Body. Pro-Line is pushing the limit of body development by providing a pre-Painted and Partially Trimmed/Stickered Short Course body to get you to the […]
Posted in RC News Tags: 22, 8ight-E 2.0, B4.2, bulldog, D812, F11 Wheel, Ion, Proline Racing, rc8.2, T4.2, TLR, Trencher, Trencher SC, wing Comments Off on Pro-Line March 2013 NEW RELEASES
AVID RC8.2 Rear Chassis Brace Support
October 21st, 2012 Joseph The AVID RC8.2 Carbon Rear Chassis Brace Support AV1803 is designed to help prevent the breaking/tearing of the stock molded RC8.2 brace which is used in the RC8, RC8B, and RC8.2. The molded brace offers the best performance for the vehicle but due to brace having a 5 degree angle placed in it to help […]
Posted in RC News Tags: 1/8 buggy, Associated, Avid RC, rc8.2 Comments Off on AVID RC8.2 Rear Chassis Brace Support
AVID RC8.2 Aluminum Rear Hub
October 21st, 2012 Joseph The new AVID aluminum rear hub will be a must-have for racers running the popular Associated RC8.2 buggy. AVID designers incorporated adjustments that are not available on any other RC8.2 rear hub. First, the hubs feature 3.5mm thick carbon fiber mounting towers which can be flipped to have a total of 8 possible upper link […]
Posted in RC News Tags: 1/8 buggy, Associated, Avid RC, rc8.2 Comments Off on AVID RC8.2 Aluminum Rear Hub
AVID – RC8.2 1mm Offset Insert Bushings
July 19th, 2012 Matt Checkout this new release from Avid RC. AV1804 series of 1mm Offset Insert Bushings allow for a new range of tuning using your kit supplied suspension mounts. After hours of testing, the AVID team is offering up this simple solution to allow racers to customize their suspension to get lower rear roll centers and adjust […]
Posted in RC News Tags: Avid RC, Offset Bushings, rc8.2 Comments Off on AVID – RC8.2 1mm Offset Insert Bushings
AVID Titanium Shock Pins for RC8.2, RC8.2e & SC10 4×4
June 1st, 2012 Kevin AV1802 RC8.2 Titanium Shock Pins need no introduction. Racers everywhere will want to upgrade their 8.2 and SC10 4×4 vehicles with this light-weight and useful hop-up. Machined from billet 6Al-4V Titanium Center-drilled to locate calipers for precise shock length and droop measurements. Lose weight and add “bling” over the kit steel pins (6.4 g versus […]
RC8.2 Aluminum Servo Saver Arm
May 22nd, 2012 Kevin Avid is proud to announce the first product in their 8th scale off-road line, the RC8.2 aluminum servo saver arm which fits all RC8.2, RC8B, and SC8 vehicles. This part not only adds rigidity in the steering system for more precise feel under high loads, but also is M3 tapped to allow for the lower nut to […]
