May 1st, 2012 
Kevin Tekno RC M6 Driveshafts and Lightened Outdrives for Losi SCTE
Add another hit to Tekno RC’s growing list of performance upgraded driveshafts. This time we bring you the most efficient and most durable driveshafts available for the Losi SCTE. We started with new ‘Big Ball’ shafts. The bigger ball on the end provides smoother suspension action and prevents the axle from hitting the outdrives on full compression. This required us to design some new outdrives as well – no problem. They are hardened for durability and ultra light for the best acceleration.
We didn’t stop there, we made new stub axles too. The new stub axles allow for more steering angle while being smoother (more efficient) than the stock units at any angle. This means they won’t bind at full steering lock. They are also made from the same material as our other driveshafts which means they will last far longer than the stock units.
The driveshaft parts are available separately:
TKR2210X -> Complete driveshafts (2pcs)
TKR2210 -> Axles only (2pcs)
TKR2211 -> Stub axles (2pcs)
TKR2212 -> Lightened outdrives (2pcs)
TKR2216 -> CV Rebuild kit (for 2 driveshafts)
Features:
- Stronger than stock driveshafts. They will last longer and require less maintenance.
- Increased steering angle, smoother steering response.
- ‘Big Ball’ shaft design for smoother suspension action and better outdrive clearance
- Lightened outdrives and stub axles
- All hardened steel construction
- Completely rebuildable
- Track tested
Note: These driveshafts are not compatible with the stock driveshaft parts (i.e. you can’t use our shafts and the stock outdrives for example).
PART #: TKR2210X
MSRP: $49.99
Tekno RC HD Center Driveshafts for Losi SCTE
One of the main weaknesses of the Losi SCTE (Ten-T, 810) is the center front driveshaft. The extreme angle and cheap stock material causes the barrel and pins to wear prematurely. Worse yet is when the pins eject while you’re halfway through your main event!
We have engineered a new set of center driveshafts and diff couplers based on our top of the line M6 driveshaft design. Through the use of the finest materials and hardening methods, we have come up with a driveshaft that will last at least twice as long as the stock units. The best part is our proven snapring that retains the drive pin. Drive with confidence knowing that your pin is secure and moving freely and efficiently. Start saving money and hassle on stock replacements and step up to the best!
Features:
- Stronger than stock driveshaft. They will last longer and require less maintenance.
- Snapring retains the pin, it will never eject again
- Super light design
- All hardened steel construction
- Massive M5 set screw, prevents stripping out
- Completely rebuildable
- Track tested
Parts available separately:
TKR2216 -> snaprings
TKR2215 -> CV rebuild kit
TKR2213 -> complete center front driveshaft
TKR2217 -> complete center rear driveshaft
PART #: TKR2213, TKR2217
MSRP: $17.99, $19.99
For more visit http://www.teknorc.com/
Posted in 
Tags: 
