The RS GEN2 brushless speed control is the next generation in intelligent operating motor drive technology. Continuing the proven award-winning legacy of the RS family, the GEN2 is fitted with today’s state of the art components. The RS GEN2 delivers what racers require; reliability, precise control and unmatched power handling capability.

Packed with new features, the RS GEN2 delivers a programmable high-voltage BEC, an EZ Access Port for HotWire communication and Datalogging capabilities in a small sized package. Rated for 8.5 turn motors and higher, the GEN2 is the perfect ESC for both experienced and new racers. Couple the RS GEN2 with a Redline GEN2 brushless motor for the ultimate package in race equipment.

Features:

• Ultra-smooth and Precise Throttle and Braking Control
• Compatible with Sensored/Sensorless Brushless and Brushed Motors
• Easily Access Programming, Anywhere, Anytime
• Datalogging Capability
• High Voltage Programmable BEC
•  EZ Access HotWire Programming Port
• HotWire PC Interface for Advanced Programming and Updating
• D2: Dual Drive Mode Technology
• On-Board Temperature Indicator
• HDAC: High Density Copper PCB’s
• Sensor Plug for Precise Commutation with all Motors
• Gold-plated Solder Posts for Easy Wire Replacement
• Self Test Diagnostics and Factory Reset
• Pit Tune Mode
• DGF2: Digital Glitch Filtering V2
• QuickTune™ Programming
• One-Touch Radio Calibration

Program Features:

• High Voltage BEC (6.0v/7.4v)*
• Drag Brake (13 steps)
• Brake / Reverse Strength (13 steps)
• Current Limiter (none + 12 steps)
• Neutral Width (13 steps)
• Timing Profiles (5 preset – 2 custom*)
• Adjustable Throttle and Brake Minimums
• Custom Throttle Curves
• Motor/Reverse Type: Brushless, Brushed, No Rev, Rev Delay
• Voltage Cutoffs (none, 2S, 3S, Custom)
• Timing Boost and Turbo when used with Hotwire
• ROAR Race Spec “Blinky” Mode
• Save, Load and Share custom ESC setup files
• Extensive Tuning via Tekin HotWire PC Interface
• *Requires HotWire Sold Separately

Specs:

• Controls: Forward/Brake/Reverse
• Input Voltage: 4-9 Cells, 2S-3S Lipo
• BEC: 6.0v / 7.4v 5.5amps
• Motor Limit Brushless Mode: 8.5 Turn, 540 2-pole (36mm)
• Motor Limit Brushed Fwd Only Mode: 10 Turn
• Motor Limit Brushed Fwd/Rev Mode: 12 Turn
• Timing Profiles: 7 choices (on board)
• Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
• Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
• Dimensions: 1.0 x 1.3 x .51in (25.4 x 33 x 12.9mm)
• Weight: 2.0oz / 48g with wiring

Source> Tekin