PRODUCT DESCRIPTION:
MIP would like to introduce the drive system of the future, for all Mod 2WD vehicles; MOD #14160 MIP ‘SHINY’ PUCKS™ SYSTEMS!!!! These systems are of steel construction, keeping to relatively the same overall weight that you are used to with your steel OEM drivetrain; but giving you the added benefit of MIP Pucks™ that are fully serviceable. No longer will diff outdrives and CV bones wear simultaneously, with the Puck™ system all that is needed is to easily change Pucks™ when necessary, and the drivetrain stays tighter, fresher, longer. This added benefit equates to less money, less time off the track for rebuilds, and keeps your vehicle more competitive.

TARGET CUSTOMERS:
Serious racers looking for a competitive advantage on the track
Racers with 13.5 or higher motors

COMPETITIVE ADVANTAGES:
Quicker acceleration
Less overall wear on drive components

FEATURES:
Replaceable Pucks to keep drivetrain fresh
Race Prove C-CVD™ Construction
Two sets of holes in the C-CVD™ bell
100% Quality made in the USA!

INCLUDES:
MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), MIP Instruction Sheet (1), 1/16” Chrome Steel Ball Bearings (7), #2 Hardened Washer (1), MIP Thrust Retainer (1), Diff Lube & Grease Cup (1), ¼” x 9/32” Diff Spring (1), 2-56 x .925 Diff Screw (1), MIP T-Nut (1), MIP Diff Thrust Cover (1),  MIP Pucks™ Male Outdrive (1), MIP Pucks™ Female Outdrive (1), BHCS, 1-72 x 1/8” Button Head (6), MIP 3/16” CVD™ Coupling (2), SHSS 4-40 x 3/32” Cup Point (2), M4 x .7mm Steel Locknut (2), 1/16 x .430” Solid Pin (2), MIP Retaining Ring (2), MIP Lube & Thread Gel Cup (1), MIP CVD™ Puck™ Pin (2), MIP Outdrive Puck™ (8), MIP CVD™ Axle Team-C Evo Buggy (2), MIP Pucks™ Shiny C-CVD™ Bone Team-C Evo Buggy (2)

REQUIRES:
.050 Allen Key – (Suggest – #9000 MIP Hex Driver Wrench .050 inch)
2.0mm Allen Key- (Suggest – #9008 MIP Hex Driver Wrench 2.0mm)

COMPATIBILITY:
Team-C Evo Buggy (TC02 Evo 2WD buggy)

SUPPORT PRODUCTS:
#9148   HW-SPRING/ Ball Diff, AE SC10 (1) MSRP: $1.50
#9149 HW-Bearing, 3/32” Chrome Steel Ball (12) MSRP: $2.50
#9151   MIP Ball Diff Thrust Washers, 1/4in x 3/32in AE SC10, T4, B4 (2) MSRP: $2.00
#10144 MIP C-CVD™ Rebuild Kit, w/Set Screws MSRP: $6.00
#11115 MIP Capture Rings (4) for all 1/10 MIP CVD™ MSRP: $6.00
#13131 MIP Pucks™, Orange No.1 Pucks (8) MSRP: $6.00
#13132 MIP Pucks™, No.1 Pins & Screws (2) MSRP: $8.00
#14161 MIP Pucks™, Shiny C-CVD™ Bones, Team-C Evo Buggy (2) MSRP: $25.00
#14162 MIP CVD™ Axle, Team-C Evo (2) MSRP: $20.00
#14163 MIP Pucks™, Male Outdrive, Team-C Evo (1) MSRP: $15.00
#14164 MIP Pucks™, Female Outdrive, Team-C Evo (1) MSRP: $15.00
#14165 MIP Pucks™, MIP Pucks™, Thrust Rebuild Kit, Team-C Evo MSRP: $12.00
#99010 HW-Nut, M4 x .7mm Steel Locknut (6) MSRP: $3.50
#99016 HW-Pin, 1/16 x .430 Solid Pin (4) MSRP: $3.00
#99026 HW-SHCS, 2-56 x .92 Diff Screw (2) MSRP: $3.00
#99028 HW-SHSS, 4-40 x 3/32 Cup Point (4) MSRP: $2.50
#99064 HW-BHCS, 1-72 x 1/8 (6) MSRP: $3.50

#14160 MIP Pucks™, Shiny Drive System, Team-C Evo Buggy
MSRP: $100.00
UPC: 691545141602

_____________________________________________________________________________
PRODUCT DESCRIPTION:
MIP would like to introduce the drive system of the future, for all Mod 2WD vehicles; MOD #14170 MIP ‘SHINY’ PUCKS™ SYSTEMS!!!! These systems are of steel construction, keeping to relatively the same overall weight that you are used to with your steel OEM drivetrain; but giving you the added benefit of MIP Pucks™ that are fully serviceable. No longer will diff outdrives and CV bones wear simultaneously, with the puck system all that is needed is to easily change Pucks™ when necessary, and the drivetrain stays tighter, fresh, longer. This added benefit equates to less money, less time off the track for rebuilds, and keeps your vehicle more competitive.

TARGET CUSTOMERS:
Serious racers looking for a competitive advantage on the track
Racers with 13.5 or higher motors

COMPETITIVE ADVANTAGES:
Quicker acceleration
Less overall wear on drive components

FEATURES:
Replaceable Pucks to keep drivetrain fresh
Race Prove C-CVD™ Construction
Two sets of holes in the C-CVD™ bell
100% Quality made in the USA!

INCLUDES:
MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), MIP Instruction Sheet (1), 1/16” Chrome Steel Ball Bearings (7), #2 Hardened Washer (1), MIP Thrust Retainer (1), Diff Lube & Grease Cup (1), ¼” x 9/32” Diff Spring (1), 2-56 x .925 Diff Screw (1), MIP T-Nut (1), MIP Diff Thrust Cover (1),  MIP Pucks™ Male Outdrive (1), MIP Pucks™ Female Outdrive (1), BHCS, 1-72 x 1/8” Button Head (6), MIP 3/16” CVD™ Coupling (2), SHSS 4-40 x 3/32” Cup Point (2), M4 x .7mm Steel Locknut (2), 1/16 x .430” Solid Pin (2), MIP Retaining Ring (2), MIP Lube & Thread Gel Cup (1), MIP CVD™ Puck™ Pin (2), MIP Outdrive Puck™ (8), MIP CVD™ Axle Team-C Evo (2), MIP Pucks™ Shiny C-CVD™ Bone Team-C Evo SC Truck (2)

REQUIRES:
.050 Allen Key – (Suggest – #9000 MIP Hex Driver Wrench .050 inch)
2.0mm Allen Key- (Suggest – #9008 MIP Hex Driver Wrench 2.0mm)

COMPATIBILITY:
2WD Team-C TR2 SC &  TC02T Stadium Truck

SUPPORT PRODUCTS:
#9148   HW-SPRING/ Ball Diff, AE SC10 (1) MSRP: $1.50
#9149   HW-Bearing, 3/32” Chrome Steel Ball (12) MSRP: $2.50
#9151   MIP Ball Diff Thrust Washers, 1/4in x 3/32in AE SC10, T4, B4 (2) MSRP: $2.00
#10144 MIP C-CVD™ Rebuild Kit, w/Set Screws MSRP: $6.00
#11115 MIP Capture Rings (4) for all 1/10 MIP CVD™ MSRP: $6.00
#13131 MIP Pucks™, Orange No.1 Pucks (8) MSRP: $6.00
#13132 MIP Pucks™, No.1 Pins & Screws (2) MSRP: $8.00
#14162 MIP CVD™ Axle, Team-C Evo (2) MSRP: $20.00
#14163 MIP Pucks™, Male Outdrive, Team-C Evo (1) MSRP: $15.00
#14164 MIP Pucks™, Female Outdrive, Team-C Evo (1) MSRP: $15.00
#14165 MIP Pucks™, MIP Pucks™, Thrust Rebuild Kit, Team-C Evo MSRP: $12.00
#14171 MIP Pucks™, Shiny C-CVD™ Bones, Team-C SC Truck (2) MSRP: $25.00
#99010 HW-Nut, M4 x .7mm Steel Locknut (6) MSRP: $3.50
#99016 HW-Pin, 1/16 x .430 Solid Pin (4) MSRP: $3.00
#99026 HW-SHCS, 2-56 x .92 Diff Screw (2) MSRP: $3.00
#99028 HW-SHSS, 4-40 x 3/32 Cup Point (4) MSRP: $2.50
#99064 HW-BHCS, 1-72 x 1/8 (6) MSRP: $3.50