PRODUCT DESCRIPTION:
MIP would like to introduce the drive system of the future, for all Mod 2wd vehicles; MOD #14200 MIP ‘SHINY’ PUCKS™ SYSTEMS!!!! These systems are of steel construction, keeping to relatively the same overall weight that you are used to with your steel OEM drivetrain; but giving you the added benefit of MIP Pucks™ that are fully serviceable. No longer will diff outdrives and CV bones wear simultaneously, with the puck system all that is needed is to easily change Pucks™ when necessary, and the drivetrain stays tighter, fresh, longer. This added benefit equates to less money, less time off the track for rebuilds, and keeps your vehicle more competitive.

TARGET CUSTOMERS:
Serious racers looking for a competitive advantage on the track
Racers with 13.5 or higher motors

COMPETITIVE ADVANTAGES:
Quicker acceleration
Less overall wear on drive components

FEATURES:
Replaceable Pucks to keep drivetrain fresh
Race Prove C-CVD™ Construction
Two sets of holes in the C-CVD™ bell
100% Quality made in the USA!

INCLUDES:
MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), MIP Instruction Sheet (1), Diff Lube & Grease Cup (1), 3/32” Chrome Steel Ball Bearing (14), 1/16” Chrome Steel Ball Bearing (7), MIP Modified Diff Ring (2), #2 Hardened Washer (1), MIP Thrust Retainer (1), ¼” x 9/32” Diff Spring (1), 2-56 x .925 Shoulder  Diff Screw (1), MIP T-Nut (1), MIP Thrust Diff Cover (1), MIP Pucks™ Male Outdrive (1), MIP Pucks™ Female Outdrive (1), 4-40 X 3/32” SHSS Cup Point (2), 1/16” x .430” Solid Pin (2), 1/16” x 3/8” Roll Pin (2), M4 x .7mm Steel Locknut (2), 1-72 x 1/8” Button Head (6), MIP 3/16” CVD™ Coupling (2), MIP Lube & Thread Gel Cup (1), MIP Retaining Ring (2), MIP CVD™ Puck Pin (2), MIP Outdrive Pucks™ (8), MIP Pucks™ Shiny C-CVD™ Bone (2), MIP CVD™ Axle (2)

REQUIRES:
.050″ Allen Key – (Suggest – #9000 MIP Hex Driver Wrench .050 inch)
5/64″ Allen Key- (Suggest – #9002 MIP Hex Driver Wrench 5/64  inch)

COMPATIBILITY:
TLR22T (TLR0023)
 
SUPPORT PRODUCTS:
#9149   HW-Bearing, 3/32” Chrome Steel Ball (12) MSRP: $2.50
#10144 MIP C-CVD™ Rebuild Kit, w/Set Screws MSRP: $6.00
#11115 MIP Capture Rings (4) for all 1/10 MIP CVD™ MSRP: $6.00
#12169 MIP Super Diff Rings, TLR 22/22T/22SCT MSRP: $5.00
#12217 MIP CVD™ Axle, TLR 22T (1) MSRP: $10.00
#13131 MIP Pucks™, Orange No.1 Pucks (8) MSRP: $6.00
#13132 MIP Pucks™, No.1 Pins & Screws (2) MSRP: $8.00
#13147 MIP Pucks™, Male Aluminum Outdrive, TLR 22/22T/22 SCT MSRP: $10.00
#13148 MIP Pucks™, Female Aluminum Outdrive, TLR 22/22T/22 SCT MSRP: $10.00
#13149 MIP Pucks™, Thrust Rebuild Kit, TLR 22/22T/22 SCT MSRP: $12.00
#13151 MIP Pucks™, MIP C-CVD™ Aluminum Bone, TLR 22T (1) MSRP: $10.00
#14116 MIP Pucks™, Male Outdrive, TLR 22 (1) MSRP: $12.00
#14117 MIP Pucks™, Female Outdrive, TLR 22 (1) MSRP: $12.00
#14201 MIP Pucks™, Shiny C-CVD™ Bone, TLR 22T (2) MSRP: $25.00
#99002 HW-Bearing, 1/16 Ch Steel Ball (8) MSRP: $3.50
#99010 HW-Nut, M4 x .7mm Steel Locknut (6) MSRP: $3.50
#99015 HW-Pin, 1/16 x 3/8 Roll Pin (8) MSRP: $3.00
#99016 HW-Pin, 1/16 x .430 Solid Pin (4) MSRP: $3.00
#99026 HW-SHCS, 2-56 x .92 Diff Screw (2) MSRP: $3.00
#99028 HW-SHSS, 4-40 x 3/32 Cup Point (4) MSRP: $2.50
#99064 HW-BHCS, 1-72 x 1/8 (6) MSRP: $3.50

#14200 MIP Pucks™, Shiny Drive System, TLR 22T
MSRP: $95.00
UPC: 691545142005