MIP would like to introduce the drive system of the future, for all Mod 2wd vehicles; MOD #14150 MIP ‘SHINY’ PUCKS™ SYSTEMS!!!! These systems are of steel construction, keeping to relatively the same overall weight that you are used to with your steel OEM drivetrain; but giving you the added benefit of MIP Pucks™ that are fully serviceable. No longer will diff outdrives and CV bones wear simultaneously, with the puck system all that is needed is to easily change Pucks™ when necessary, and the drivetrain stays tighter, fresh, longer. This added benefit equates to less money, less time off the track for rebuilds, and keeps your vehicle more competitive.
TARGET CUSTOMERS:
Serious racers looking for a competitive advantage on the track
Racers with 13.5 or higher motors
COMPETITIVE ADVANTAGES:
Quicker acceleration
Less overall wear on drive components
FEATURES:
Replaceable Pucks to keep drivetrain fresh
Race Prove C-CVD™ Construction
Two sets of holes in the C-CVD™ bell
100% Quality made in the USA!
INCLUDES:
MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), MIP Instruction Sheet (1), Diff Lube & Grease Cup (1), 5/64” Chrome Steel Ball Bearings (6), #2 Hardened Washer (2), ¼” x 9/32” Diff Spring (1), 2-56 x .925 Diff Screw (1), MIP T-Nut (1), MIP Pucks™ Male Outdrive (1), MIP Pucks™ Female Outdrive (1), MIP Diff Thrust Cover (1), BHCS, 1-72 x 1/8” Button Head (6), MIP Lube & Thread Gel Cup (1), MIP CVD™ Puck™ Pin (2), MIP Outdrive Puck™ (8), MIP Pucks™ Shiny CVA Bone (2)
REQUIRES:
.050 Allen Key – (Suggest – #9000 MIP Hex Driver Wrench .050 inch)
2.0mm Allen Key- (Suggest – #9008 MIP Hex Driver Wrench 2.0mm)
COMPATIBILITY:
Hobby Pro-PRS1
#14150 MIP Pucks™, Shiny Drive System, Hobby Pro PRS1
MSRP: $80.00
UPC: 691545141503
SUPPORT PRODUCTS:
#13131 MIP Pucks™, Orange No.1 Pucks (8) MSRP: $6.00
#13132 MIP Pucks™, No.1 Pins & Screws (2) MSRP: $8.00
#14151 MIP Pucks™, Shiny CVA Bones, Hobby Pro PRS1 (2) MSRP: $30.00
#14152 MIP Pucks™, Male Outdrive, Hobby Pro PRS1 (1) MSRP: $15.00
#14153 MIP Pucks™, Female Outdrive, Hobby Pro PRS1 (1) MSRP: $15.00
#14154 MIP Pucks™, Thrust Rebuild Kit, Hobby Pro PRS1 MSRP: $12.00
#99026 HW-SHCS, 2-56 x .92 Diff Screw (2) MSRP: $3.00
#99061 HW-Bearing, 5 x 8 x 2.5mm (2) MSRP: $5.00
#99064 HW-BHCS, 1-72 x 1/8 (6) MSRP: $3.50