#14230 MIP Pucks™, Bi-Metal R-CVD™ Drive System, Team Associated AE B5/B5M
MSRP: $90.00
UPC: 691545142302

PRODUCT DESCRIPTION:
Unlike any design seen in the RC world: MIP Bi-Metal R-CVD™’s! This all new design features a keyed joint made out of hardened alloy steel that connects to 7075 hard anodized aluminum. This feature allows you to lighten up the drivetrain without sacrificing the durability that steel components offer. Also with this R-CVD™ design it couples your original axle components with the MIP Bi-Metal bone to keep costs low and give you the essentials to transfer over to MIP’s Puck system! Of course the system is accompanied by 7075 hard anodized aluminum outdrives and the necessary components to build your aluminum puck diff. Get what your RC stock vehicle needs to keep up with the competition, MIP Bi-Metal R-CVD™’s! 100% Made in the USA!

TARGET CUSTOMERS:
B5/B5M Stock Racers

COMPETITIVE ADVANTAGES:
40% plus lighter than OEM
Lower maintenance costs
Higher quality materials used

FEATURES:
Replaceable Pucks
R-CVD™ Keyed Design
7075 Hard Anno Aluminum
Hardened Alloy Steel
USA Grade materials
100% Made in the USA!

INCLUDES:
MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), MIP Instruction sheet (1),  Diff Lube & Grease Cup (1), 1/16” Chrome Steel Ball Bearing (7), #2 Hardened Washer (1),  MIP Thrust Retainer (1), MIP Pucks™ Male Outdrive AE B5/B5M (1), MIP Pucks™ Female Outdrive AE B5/B5M (1), BHCS 1-72×1/8 Button Head (6), SHCS 1/72x.250 Cap Screw (2), MIP CVD™ Puck™ Pin (2), MIP Outdrive Puck™ (8), MIP Bi-Metal R-CVD™ Yoke AE B5/B5M (2), MIP Bi-Metal R-CVD™ Bone AE B5/B5M (2)

REQUIRES:
.050 inch Allen Key – (Suggest #9000 MIP Hex Driver Wrench .050 inch)
1/16 inch Allen Key – (Suggest #9001 MIP Hex Driver Wrench 1/16 inch)

COMPATIBILITY:
Team Associated RC10 B5/RC10B5M (90001/90003)

SUPPORT PRODUCTS:
#9135   MIP Ball Diff Screw, AE SC10, T4, B4 MSRP: $4.00
#9148   HW-SPRING/ Ball Diff, AE SC10 (1) MSRP: $1.50
#9151   MIP Ball Diff Thrust Washers, 1/4in x 3/32in AE SC10, T4, B4 (2) MSRP: $2.00
#9152   HW-WASHER/ Diff Ring, AE SC10, B4, T4, GT (2) MSRP: $2.50
#13131 MIP Pucks™, Orange No.1 Pucks (8) MSRP: $6.00
#13132 MIP Pucks™, No.1 Pins & Screws (2) MSRP: $8.00
#14231 MIP Pucks™, Bi-Metal R-CVD™ Bone, AE B5/B5M (2) MSRP: $20.00
#14232 MIP Pucks™, Bi-Metal Yoke, AE B5/B5M (2) MSRP: $20.00
#14233 MIP Pucks™, Aluminum Male Outdrive, AE B5/B5M (1) MSRP: $15.00
#14234 MIP Pucks™, Aluminum Female Outdrive, AE B5/B5M (1) MSRP: $15.00
#14235 MIP Pucks™, Bi-Metal Thrust Rebuild Kit, AE B5/B5M MSRP: $12.00
#99002 HW-Bearing, 1/16 Chrome Steel Ball (8) MSRP: $3.00
#99026 HW-SHCS, 2-56 x .92 Diff Screw (2) MSRP: $3.00
#99064 HW-BHCS, 1-72 x 1/8 (6) MSRP: $3.50
#99078 HW-SHCS, 1-72 x 1/4″ Cap Head Screw (6) MSRP: $3.00

________________________________________________________________________

#14155 MIP Pucks™, Shiny Drive System, Gear Diff, Kyosho RB6
MSRP: $90.00
UPC: 691545141558

PRODUCT DESCRIPTION:
MIP would like to introduce the drive system of the future, for all Mod 2wd vehicles; MOD. MIP ‘SHINY’ PUCKS™ SYSTEMS!!!! These systems are of steel construction, keeping to relatively the same overall weight that you are used to with your steel OEM bones; but giving you the added benefit of MIP Pucks™ that are fully serviceable. No longer will diff. outdrives and CV bones wear simultaneously, with the puck system all that is needed is to easily change Pucks™ when necessary, and the drivetrain stays tighter, fresh, longer. This added benefit equates to less money, less time off the track for rebuilds, and keeps your vehicle more competitive.

TARGET CUSTOMERS:
Serious racers looking for a competitive advantage on the track
Racers with 13.5 or higher motors

COMPETITIVE ADVANTAGES:
Quicker acceleration
Less overall wear on drive components

FEATURES:
Replaceable Pucks to keep drivetrain fresh
Race Prove C-CVD™ Construction
Two sets of holes in the C-CVD™ bell
100% Quality made in the USA!

INCLUDES:
MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), MIP Instruction Sheet (1), MIP Pucks™ Gear Diff Outdrive (2), SHSS 4-40×3/32” Cup Point (2), Pin 1/16”x.430” Solid Pin (2), M4x.7mm Steel Locknut (2), BHCS 1-72×1/8 Button Head (6), MIP 3/16” CVD™ Coupling (2), MIP Lube & Thread Gel Cup (1), MIP Retaining Ring C-CVD™ (2), 4-40x.125” Flat Point Set Screw (2), MIP CVD™ Puck Pin (2), MIP Outdrive Puck (8), MIP CVD™ Axle Kyosho (2), MIP Hex Adapter Kyosho 12mm (2), MIP Shiny C-CVD™ Bone RB6 (2)

REQUIRES:
.050 Allen Key – (Suggest – #9000 MIP Hex Driver Wrench .050 inch)

COMPATIBILITY:
Kyosho Ultima RB6 (30858B)

SUPPORT PRODUCTS:
#10144 MIP C-CVD™ Rebuild Kit, w/Set Screws MSRP: $    6.00
#11115 MIP Capture Rings (4) for all 1/10 MIP CVD™ MSRP: $6.00
#12142 MIP Rear C-CVD™ Axle, Rear, Kyosho RB5/RB6 Buggy (1) MSRP: $3.00
#12144 MIP 12MM Keyed Aluminum Hex Adapters, Kyosho (2) MSRP: $12.00
#13131 MIP Pucks™, Orange No.1 Pucks (8) MSRP: $6.00
#13132 MIP Pucks™, No.1 Pins & Screws (2) MSRP: $8.00
#13166 MIP Pucks, MIP C-CVD™ Aluminum Bone, Kyosho RB5/RB6 (1) MSRP: $15.00
#14156 MIP Pucks, Gear Diff Outdrive, Kyosho RB6/RT6 (2) MSRP: $20.00
#14157 MIP Pucks™, MIP C-CVD™ Aluminum Bone, Kyosho RB5/RB6 (1) MSRP: $22.00
#99010 HW-Nut, M4 x .7mm Steel Locknut (6) MSRP: $3.50
#99016 HW-Pin, 1/16 x .430 Solid Pin (4) MSRP: $3.00
#99028 HW-SHSS, 4-40 x 3/32 Cup Point (4) MSRP: $2.50
#99029 HW-SHSS, 4-40 x 1/8 Flat point (10) MSRP: $3.00
#99064 HW-BHCS, 1-72 x 1/8 (6) MSRP: $3.50

________________________________________________________________________

#14210 MIP Pucks™, Shiny Drive System, Kyosho RB6
MSRP: $100.00
UPC: 691545142104

PRODUCT DESCRIPTION:
MIP would like to introduce the drive system of the future, for all Mod 2wd vehicles; MOD MIP ‘SHINY’ PUCKS™ SYSTEMS!!!! These systems are of steel construction, keeping to relatively the same overall weight that you are used to with your steel OEM bones; but giving you the added benefit of MIP Pucks™ that are fully serviceable. No longer will diff outdrives and CV bones wear simultaneously, with the puck system all that is needed is to easily change Pucks™ when necessary, and the drivetrain stays tighter, fresh, longer. This added benefit equates to less money, less time off the track for rebuilds, and keeps your vehicle more competitive.

TARGET CUSTOMERS:
Serious racers looking for a competitive advantage on the track
Racers with 13.5 or higher motors

COMPETITIVE ADVANTAGES:
Quicker acceleration
Less overall wear on drive components

FEATURES:
Replaceable Pucks to keep drivetrain fresh
Race Prove C-CVD™ Construction
Two sets of holes in the C-CVD™ bell
100% Quality made in the USA!

INCLUDES:
MIP Confetti Sticker (2), MIP thread Gel Safety Sheet (1), MIP Instruction Sheet (1), Diff Lube & Grease Cup (1), Diff Gear 52T (1), Diff Ring Washer (2), 3/32” Ch. Steel Ball Bearing (12), MIP Thrust Retainer (1), MIP Thrust Washer (1), 1/16” Ch. Steel Ball Bearing (7), 5/32×5/16/.125 Bearing Assoc (2), MIP Pucks™ Female Outdrive (1), MIP Pucks™ Male Outdrive (1), MIP Pucks™ Shiny C-CVD™ Bone (2), Pin 1/16”x.430” Solid Pin (2), MIP 3/16” CVD™ Coupling (2), SHSS 4-40×3/32” Cup Point (2), MIP Retaining Ring C-CVD™ (2), MIP CVD™ Axle Kyosho RB5 2wd buggy (2),  MIP Hex Adapter Kyosho 12mm (2), 4-40x.125” Flat Point Set Screw (2), Nut  M4 x .7mm Steel Locknut (2), MIP CVD™ Puck Pin (2), MIP Outdrive Puck (8), BHCS 1-72 x 1/8 Button head (6), MIP Lube & Thread Gel Cup (1)

REQUIRES:
.050 Allen Key – (Suggest – #9000 MIP Hex Driver Wrench .050 inch)
2.0mm Allen Key- (Suggest – #9008 MIP Hex Driver Wrench 2.0mm)

COMPATIBILITY:
Kyosho Ultima RB6 (30858B)

SUPPORT PRODUCTS:
#09149 HW-BEARING/ 3/32in Chrome Steel Ball (12) MSRP: $1.50
#10112 HW-BEARING/ 5/32in x 5/16in x 1/8in Ball Bearing (2) MSRP: $10.00
#10144 MIP C-CVD™ Rebuild Kit, w/Set Screws MSRP: $    6.00
#11115 MIP Capture Rings (4) for all 1/10 MIP CVD™ MSRP: $6.00
#12142 MIP Rear C-CVD™ Axle, Rear, Kyosho RB5/RB6 Buggy (1) MSRP: $3.00
#12144 MIP 12MM Keyed Aluminum Hex Adapters, Kyosho (2) MSRP: $12.00
#12161 MIP Super Diff Gear, Kyosho Ultima SC, RB5 Buggy (1) MSRP: $5.00
#12162 MIP Super Diff Rings, Kyosho Ultima SC, RB5 Buggy MSRP: $3.50
#12163 MIP Super Diff Thrust Kit, Kyosho Ultima SC, RB5 Buggy MSRP: $10.00
#13131 MIP Pucks™, Orange No.1 Pucks (8) MSRP: $6.00
#13132 MIP Pucks™, No.1 Pins & Screws (2) MSRP: $8.00
#14143 MIP Pucks, Male Outdrive, Kyosho RB6/RT6/Ultima (1) MSRP: $15.00
#14144 MIP Pucks, Female Outdrive, Kyosho RB6/RT6/Ultima (1) MSRP: $15.00
#14157 MIP Pucks™, MIP C-CVD™ Aluminum Bone, Kyosho RB5/RB6 (1) MSRP: $22.00
#99002 HW-Bearing, 1/16 Chrome Steel Ball (8) MSRP: $3.00
#99010 HW-Nut, M4 x .7mm Steel Locknut (6) MSRP: $3.50
#99016 HW-Pin, 1/16 x .430 Solid Pin (4) MSRP: $3.00
#99028 HW-SHSS, 4-40 x 3/32 Cup Point (4) MSRP: $2.50
#99029 HW-SHSS, 4-40 x 1/8 Flat point (10) MSRP: $3.00
#99064 HW-BHCS, 1-72 x 1/8 (6) MSRP: $3.50

________________________________________________________________________

#14225 MIP Pucks™, 17.5 Drive System, Gear Diff, Kyosho RB6
MSRP: $90.00
UPC: 691545142258

PRODUCT DESCRIPTION:
“MIP Pucks™” ‘ARE’ the future of 17.5 stock racing! MIP’s all new Puck™ Drive system is an aluminum based drivetrain system which includes aluminum diff outdrives, aluminum C-CVD™ bones, and replaceable plastic orange wear Pucks™ that take the place of inferior steel pins. This combination greatly increases the longevity of the drivetrain and most importantly decreases the drivetain’s overall rotating mass by a whopping 50%! The decrease in weight directly results in quicker acceleration, deceleration, and lower motor temps! Get the advantage that every stock racer craves! GET, MIP’s all new Hard Anodized 7075-T6 Aluminum Puck™ drive system!

TARGET CUSTOMERS:
17.5 Stock Racers

COMPETITIVE ADVANTAGES:
Less rotating mass
Quicker acceleration
Quicker deceleration
Lower motor temps
Less overall wear on drive components.

FEATURES:
Complete MIP Differential
Complete C-CVD™ Axle Set
50% less rotating mass over stock steal components
Replaceable Pucks to keep your drivetrain fresh
Two sets of holes in the C-CVD™ bell
Hard Anodized 7075-T6 Aluminum
Race proven C-CVD™ Construct
MIP Laser Etched Logo
100% Quality made in the USA!

INCLUDES:
MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), MIP Instruction Sheet (1), MIP Pucks™ Aluminum Gear Diff Outdrive (2), SHSS 4-40×3/32” Cup Point (2), Pin 1/16”x.430” Solid Pin (2), M4x.7mm Steel Locknut (2), BHCS 1-72×1/8 Button Head (6), MIP 3/16” CVD™ Coupling (2), MIP Lube & Thread Gel Cup (1), MIP Retaining Ring C-CVD™ (2), 4-40x.125” Flat Point Set Screw (2), MIP CVD™ Puck Pin (2), MIP Outdrive Puck (8), MIP CVD™ Axle Kyosho (2), MIP Hex Adapter Kyosho 12mm (2), MIP Alum. Lite C-CVD™ Bone (2)

REQUIRES:
.050 Allen Key – (Suggest – #9000 MIP Hex Driver Wrench .050 inch)
2.0mm Allen Key- (Suggest – #9008 MIP Hex Driver Wrench 2.0mm)

COMPATIBILITY:
Kyosho Ultima RB6 (30858B)

SUPPORT PRODUCTS:
#10144 MIP C-CVD™ Rebuild Kit, w/Set Screws MSRP: $    6.00
#11115 MIP Capture Rings (4) for all 1/10 MIP CVD™ MSRP: $6.00
#12142 MIP Rear C-CVD™ Axle, Rear, Kyosho RB5/RB6 Buggy (1) MSRP: $3.00
#12144 MIP 12MM Keyed Aluminum Hex Adapters, Kyosho (2) MSRP: $12.00
#13131 MIP Pucks™, Orange No.1 Pucks (8) MSRP: $6.00
#13132 MIP Pucks™, No.1 Pins & Screws (2) MSRP: $8.00
#13166 MIP Pucks, MIP C-CVD™ Aluminum Bone, Kyosho RB5/RB6 (1) MSRP: $15.00
#14143 MIP Pucks, Male Outdrive, Kyosho RB6/RT6/Ultima (1) MSRP: $15.00
#14144 MIP Pucks, Female Outdrive, Kyosho RB6/RT6/Ultima (1) MSRP: $15.00
#14156 MIP Pucks, Gear Diff Outdrive, Kyosho RB6/RT6 (2) MSRP: $20.00
#14157 MIP Pucks™, MIP C-CVD™ Aluminum Bone, Kyosho RB5/RB6 (1) MSRP: $22.00
#14226 MIP Pucks, 17.5 Aluminum Outdrive, Gear Diff, Kyosho (2) MSRP: $25.00
#99002 HW-Bearing, 1/16 Chrome Steel Ball (8) MSRP: $3.00
#99010 HW-Nut, M4 x .7mm Steel Locknut (6) MSRP: $3.50
#99016 HW-Pin, 1/16 x .430 Solid Pin (4) MSRP: $3.00
#99028 HW-SHSS, 4-40 x 3/32 Cup Point (4) MSRP: $2.50
#99029 HW-SHSS, 4-40 x 1/8 Flat point (10) MSRP: $3.00
#99064 HW-BHCS, 1-72 x 1/8 (6) MSRP: $3.50

________________________________________________________________________

#14240 MIP Pucks™, 17.5 Drive System, Kyosho RT6
MSRP: $100.00
UPC: 691545142401

PRODUCT DESCRIPTION:
“MIP Pucks™” ‘ARE’ the future of 17.5 stock racing! MIP’s all new Puck Drive system is an aluminum based drivetrain system which includes aluminum diff outdrives, aluminum C-CVD™ bones, and replaceable plastic orange wear Pucks that take the place of inferior steel pins. This combination greatly increases the longevity of the drivetrain and most importantly decreases the drivetain’s overall rotating mass by a whopping 50%! The decrease in weight directly results in quicker acceleration, deceleration, and lower motor temps! Get the advantage that every stock racer craves! GET, MIP’s all new Hard Anodized 7075-T6 Aluminum Puck drive system!

TARGET CUSTOMERS:
17.5 Stock Racers

COMPETITIVE ADVANTAGES:
Less rotating mass
Quicker acceleration
Quicker deceleration
Lower motor temps
Less overall wear on drive components.

FEATURES:
Complete MIP Differential
Complete C-CVD™ Axle Set
50% less rotating mass over stock steal components
Replaceable Pucks to keep your drivetrain fresh
Two sets of holes in the C-CVD™ bell
Hard Anodized 7075-T6 Aluminum
Race proven C-CVD™ Construct
MIP Laser Etched Logo
100% Quality made in the USA!

INCLUDES:
MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), MIP Instruction Sheet (1), MIP Diff Lube & Grease Cup (1), MIP Diff Gear (1), MIP Thrust Retainer (1), MIP Thrust Washer (1), Diff Ring Washer (1), 5/32×5/16x.125” Bearing (1), MIP Pucks™ Male Outdrive Kyosho (1), MIP Pucks™ Female Outdrive Kyosho (1), MIP Pucks™ Shiny CVD™ Bone Kyosho RT6 (2), 1/16”x.430 Solid Pin (2), MIP 3/16” CVD™ Coupling (2), SHSS 4-40×3/32” Cup Point (2), MIP Retaining Ring (2), MIP CVD™ Quick Release Axle Kyosho RT6 (2), MIP CVD™ Puck Pin (2), MIP Outdrive Puck™ (8), BHCS 1-72×1/8” Button Head (6), MIP Lube & Thread Gel Cup (1)

REQUIRES:
.050 inch Allen Key – (Suggest #9000 MIP Hex Driver Wrench .050 inch)

COMPATIBILITY:
Kyosho Ultima RT6 Stadium Truck (30069B)

SUPPORT PRODUCTS:
#9149 HW-Bearing, 3/32” Chrome Steel Ball (12) MSRP: $2.50
#10112 HW-BEARING/ 5/32in x 5/16in x 1/8in Ball Bearing (2) MSRP: $10.00
#10144 MIP C-CVD™ Rebuild Kit, w/Set Screws MSRP: $6.00
#11115 MIP Capture Rings (4) for all 1/10 MIP CVD™ MSRP: $6.00
#12161 MIP Super Diff Gear, Kyosho Ultima SC, RB5 Buggy (1) MSRP: $5.00
#12162 MIP Super Diff Rings, Kyosho Ultima SC, RB5 Buggy MSRP: $3.50
#12163 MIP Super Diff Thrust Kit, Kyosho Ultima SC, RB5 Buggy MSRP: $10.00
#13131 MIP Pucks™, Orange No.1 Pucks (8) MSRP: $6.00
#13132 MIP Pucks™, No.1 Pins & Screws (2) MSRP: $8.00
#13161 MIP Pucks™, MIP C-CVD™ Aluminum Bone, Kyosho Ultima SC-R (1) MSRP: $10.00
#13162 MIP Pucks™, Male Aluminum Outdrive, Kyosho SC-R (1) MSRP: $10.00
#13163 MIP Pucks™, Female Aluminum Outdrive, Kyosho SC-R (1) MSRP: $10.00
#14142 MIP CVD™ Quick Release Axle, Kyosho RT6 (2) MSRP: $20.00
#99002 HW-Bearing, 1/16 Chrome Steel Ball (8) MSRP: $3.00
#99016 HW-Pin, 1/16 x .430 Solid Pin (4) MSRP: $3.00
#99028 HW-SHSS, 4-40 x 3/32 Cup Point (4) MSRP: $2.50
#99064 HW-BHCS, 1-72 x 1/8 (6) MSRP: $3.50

________________________________________________________________________

#14205 MIP Pucks™, Shiny Drive System, TLR 22SCT
MSRP: $95.00
UPC: 691545142050

PRODUCT DESCRIPTION:
MIP would like to introduce the drive system of the future, for all Mod 2wd vehicles; MOD MIP ‘SHINY’ PUCKS™ SYSTEMS!!!! These systems are of steel construction, keeping to relatively the same overall weight that you are used to with your steel OEM bones; but giving you the added benefit of MIP Pucks™ that are fully serviceable. No longer will diff outdrives and CV bones wear simultaneously, with the puck system all that is needed is to easily change Pucks™ when necessary, and the drivetrain stays tighter, fresh, longer. This added benefit equates to less money, less time off the track for rebuilds, and keeps your vehicle more competitive.

TARGET CUSTOMERS:
Serious racers looking for a competitive advantage on the track
Racers with 13.5 or higher motors

COMPETITIVE ADVANTAGES:
Quicker acceleration
Less overall wear on drive components

FEATURES:
Replaceable Pucks to keep drivetrain fresh
Race Prove C-CVD™ Construction
Two sets of holes in the C-CVD™ bell
100% Quality made in the USA!

INCLUDES:
MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), MIP Instruction Sheet (1), Bearing 3/32” Chrome Steel Ball (14), Bearing 1/16” Chrome Steel Ball (7), MIP Modified Diff Rings (2), #2 Hardened Washer (1), MIP Thrust Retainer (1), Diff Lube & Grease Cup (1), ¼” x 9/32” Diff Spring (1), 2-56 x .925 Shoulder Diff Screw (1), T-Nut (1), Diff  Thrust Cover (1), MIP Male Outdrive(1), MIP Female Outdrive (1), SHSS,  4-40” x 3/32” Cup Point (2), 1/16” x .430” Solid Pin (2), 1/16” x 3/8” Roll Pin (2), M4 x .7mm Steel Locknut (2), BHCS 1/72 x 1/8” Button Head (6), MIP 3/16” CVD™ Coupling (2), MIP Lube & Thread Gel Cup (1), MIP Retaining Ring C-CVD™ (2), MIP CVD Puck Pin (2), MIP Outdrive Puck (8), MIP Shiny C-CVD™ Bone (2), MIP CVD™ Axle TLR 22SCT

REQUIRES:
.050 Allen Key – (Suggest – #9000 MIP Hex Driver Wrench .050 inch)
2.0mm Allen Key- (Suggest – #9008 MIP Hex Driver Wrench 2.0mm)

COMPATIBILITY:
TLR22 2.0 (TLR03002)

SUPPORT PRODUCTS:
#9149 HW-Bearing, 3/32” Chrome Steel Ball (12) MSRP: $2.50
#10144 MIP C-CVD™ Rebuild Kit, w/Set Screws MSRP: $6.00
#11115 MIP Capture Rings (4) for all 1/10 MIP CVD™ MSRP: $6.00
#12169 MIP Super Diff Rings, TLR 22/22T/22SCT MSRP: $5.00
#12223 MIP CVD™ Axle, TLR 22SCT (1) MSRP: $10.00
#13131 MIP Pucks™, Orange No.1 Pucks (8) MSRP: $6.00
#13132 MIP Pucks™, No.1 Pins & Screws (2) MSRP: $8.00
#13146 MIP Pucks, MIP C-CVD™ Alumimum Bone, TLR 22 SCT (1) MSRP: $10.00
#13147 MIP Pucks™, Male Aluminum Outdrive, TLR 22/22T/22 SCT MSRP: $10.00
#13148 MIP Pucks™, Female Aluminum Outdrive, TLR 22/22T/22 SCT MSRP: $10.00
#13149 MIP Pucks™, Thrust Rebuild Kit, TLR 22/22T/22 SCT MSRP: $12.00
#14206 MIP Pucks™, Shiny C-CVD™ Bone, TLR 22SCT (2) MSRP: $25.00
#99002 HW-Bearing, 1/16 Chrome Steel Ball (8) MSRP: $3.00
#99010 HW-Nut, M4 x .7mm Steel Locknut (6) MSRP: $3.50
#99015 HW-Pin, 1/16 x 3/8 Roll Pin (8) MSRP: $3.00
#99016 HW-Pin, 1/16 x .430 Solid Pin (4) MSRP: $3.00
#99026 HW-SHCS, 2-56 x .92 Diff Screw (2) MSRP: $3.00
#99028 HW-SHSS, 4-40 x 3/32 Cup Point (4) MSRP: $2.50
#99064 HW-BHCS, 1-72 x 1/8 (6) MSRP: $3.50

________________________________________________________________________

#14175 MIP Shiny C-CVD™ Kit, Front, TLR 22-4
MSRP: $45.00
UPC: 691545141756

PRODUCT DESCRIPTION:
A blast from the past comes to us from the TLR camp with the reincarnation of the Team Losi XX-4 platform; and what emerged from their doors was the TLR 22-4. Back in the XX-4 era MIP was fresh on its heels with the Shiny CVD™ line of products to replace the OEM universals, and as the saying goes, ‘history repeats itself.’ MIP C-CVD™’s have re-emerged with the retro style look, built out of the highest quality alloy steel, hardened to perfection, and of course 100% American Made Goodness laced into its DNA. Get what your TLR 22-4 needs, MIP SHINY C-CVD™’s!

TARGET CUSTOMERS:
TLR 22-4 owners

COMPETITIVE ADVANTAGES:
Positive acceleration
No binding
Completely rebuild-able

FEATURES:
Precision machined from alloy steel
Heated treated for excellent strength & wear resistances
Nickel plated for stunning visual effect
Steel Axles precision machined for perfect bearing fits

INCLUDES:
MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), MIP Instruction sheet (1), MIP Shiny C-CVD™ Bone Front TLR 22-4 (2), MIP Retaining Ring C-CVD™ (2), MIP CVD™ Axle Front TLR 22-4 (2), MIP 3/16” CVD™ Coupling (2), SHSS 4-40×3/32” Cup Point (2), 1/16”x.430” Solid Pin (2), MIP Lube & Thread Gel Cup (1), 1/16” x 3/8” Roll Pin (2)

REQUIRES:
.050 inch Allen Key – (Suggest #9000 MIP Hex Driver Wrench .050 inch)

COMPATIBILITY:
TLR Twenty Two-Four (TLR03005)

SUPPORT PRODUCTS:
#10144 MIP CVD™/C-CVD™ 3/16 Rebuild Kit w/ Set Screws MSRP: $6.00
#11115 MIP Capture Rings (4) for all 1/10 MIP CVD™ MSRP: $6.00
#14176 MIP Shiny C-CVD Bone, Front, TLR 22-4 (2) MSRP: $25.00
#14177 MIP CVD Axle, Front, TLR 22-4 (2) MSRP: $20.00
#99010 HW-Nut, M4 x .7mm Steel Locknut (6) MSRP: $3.50
#99015 HW-Pin, 1/16 x 3/8 Roll Pin (8) MSRP: $3.00
#99016 HW-Pin, 1/16 x .430 Solid Pin (4) MSRP: $3.00
#99028 HW-SHSS, 4-40 x 3/32 Cup Point (4) MSRP: $3.00

________________________________________________________________________

#14180 MIP Shiny C-CVD™ Kit, Rear, TLR 22-4
MSRP: $45.00
UPC: 691545141800

PRODUCT DESCRIPTION:
A blast from the past comes to us from the TLR camp with the reincarnation of the Team Losi XX-4 platform; and what emerged from their doors was the TLR 22-4. Back in the XX-4 era MIP was fresh on its heels with the Shiny CVD™ line of products to replace the OEM universals, and as the saying goes, ‘history repeats itself.’ MIP C-CVD™’s have re-emerged with the retro style look, built out of the highest quality alloy steel, hardened to perfection, and of course 100% American Made Goodness laced into its DNA. Get what your TLR 22-4 needs, MIP SHINY C-CVD™’s!

TARGET CUSTOMERS:
TLR 22-4 owners

COMPETITIVE ADVANTAGES:
Positive acceleration
No binding
Completely rebuild-able

FEATURES:
Precision machined from alloy steel
Heated treated for excellent strength & wear resistances
Nickel plated for stunning visual effect
Steel Axles precision machined for perfect bearing fits

INCLUDES:
MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), MIP Instruction sheet (1), MIP Shiny C-CVD™ Bone Rear TLR 22-4 (2), MIP Retaining Ring C-CVD™ (2), MIP CVD™ Axle Rear TLR 22-4 (2), MIP 3/16” CVD™ Coupling (2), SHSS 4-40×3/32” Cup Point (2), 1/16”x.430” Solid Pin (2), MIP Lube & Thread Gel Cup (1), 1/16” x 3/8” Roll Pin (2)

REQUIRES:
.050 inch Allen Key – (Suggest #9000 MIP Hex Driver Wrench .050 inch)

COMPATIBILITY:
TLR Twenty Two-Four (TLR03005)

SUPPORT PRODUCTS:
#10144 MIP CVD™/C-CVD™ 3/16 Rebuild Kit w/ Set Screws MSRP: $6.00
#11115 MIP Capture Rings (4) for all 1/10 MIP CVD™ MSRP: $6.00
#11156 MIP C-CVD™ Axle, TLR 22 (1) MSRP: $20.00
#14181 MIP Shiny C-CVD Bone, Rear, TLR 22-4 (2) MSRP: $25.00
#99010 HW-Nut, M4 x .7mm Steel Locknut (6) MSRP: $3.50
#99015 HW-Pin, 1/16 x 3/8 Roll Pin (8) MSRP: $3.00
#99016 HW-Pin, 1/16 x .430 Solid Pin (4) MSRP: $3.00
#99028 HW-SHSS, 4-40 x 3/32 Cup Point (4) MSRP: $3.00

________________________________________________________________________

#14115 MIP Pucks™, Shiny Drive System, TLR 22 2.0
MSRP: $90.00
UPC: 691545141152

PRODUCT DESCRIPTION:
Why should only the Stock racers have the better drive system? MIP engineers have now developed a stronger Pucks™ system for the Modified racer, now introducing MIP Pucks™ Shiny Drive System. These new shiny kits from MIP provide all the speed, acceleration, and replaceable Pucks™ (Keeping your drive train running like new) of the aluminum kits just made to handle the abuse of the Modified racer. If you’re not using MIP Pucks™ you’re losing to the person that is. MIP Pucks™  Shiny Drive system provides smoother acceleration, better handling out of turns, and a little more weight to keep the vehicle grounded while helping the driver maintain more control of the vehicle. MIP Shiny Drive Pucks™ system are for the racers who use 13.5 or higher motors for their vehicle  and needs a little more strength and weight  to their drive train then MIP Aluminum Pucks™.

TARGET CUSTOMERS:
Serious racers looking for a competitive advantage on the track
Racers with 13.5 or higher motors

COMPETITIVE ADVANTAGES:
Quicker acceleration
Less overall wear on drive components

FEATURES:
Replaceable Pucks to keep drivetrain fresh
Race Prove C-CVD™ Construction
Two sets of holes in the C-CVD™ bell
100% Quality made in the USA!

INCLUDES:
MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), MIP Instruction sheet (1), 3/32” Chrome Steel Ball Bearings (14), 5/64” Chrome Steel Ball Bearings (6), MIP Modified Diff Ring (2), #2 Hardened Washer (1), MIP Thrust Retainer (1), Diff Lube & Grease Cup (1), ¼ x 9/32” Diff Spring (1), 2-56 x .925 Shoulder  Diff  Screw (1), Molded T-nut (1), Diff Thrust Cover (1), MIP Pucks™ Male Outdrive TLR 22 (1), MIP Pucks™ Female Outdrive TLR 22 (1), SHSS 4-40 x 3-32” Cup Point (2), 1/16” x .430” Solid Pin (2), 1/16” x  3/8” Roll Pin (2), M4 x .7mm Steel Locknut (2), BHCS 1-72 x 1/8 Button Head (6), MIP 3/16” CVD™ Coupling(2), MIP Lube & Thread Gel Cup (1), MIP Retaining Ring (2), MIP Bearing Spacer Front (2), MIP CVD™ Puck Pin (2), MIP Outdrive Puck (8), MIP Pucks™ Shiny Bone (2),MIP CVD™ Axle TLR 22 2.0 (2)

REQUIRES:
.050 inch Allen Key – (Suggest #9000 MIP Hex Driver Wrench .050 inch)
5/64 inch Allen Key – (Suggest #9002 MIP Hex Driver Wrench 5/64 inch)

COMPATIBILITY:
TLR 22 2.0 (TLR03002)

SUPPORT PRODUCTS:
#10144 MIP CVD™/C-CVD™ 3/16 Rebuild Kit w/ Set Screws MSRP: $6.00
#11115 MIP Capture Rings (4) for all 1/10 MIP CVD™ MSRP: $6.00
#12169 MIP Super Diff Rings, TLR 22/22T/22SCT MSRP: $5.00
#13131 MIP Pucks™, Orange No.1 Pucks (8) MSRP: $6.00
#13132 MIP Pucks™, No.1 Pins & Screws (2) MSRP: $8.00
#13149 MIP Pucks™, Thrust Rebuild Kit, TLR 22/22T/22 SCT MSRP: $12.00
#14116 MIP Pucks™, Male Outdrive, TLR 22 (1) MSRP: $12.00
#14117 MIP Pucks™, Female Outdrive, TLR 22 (1) MSRP: $12.00
#14118 MIP Pucks™, Shiny C-CVD Bones, TLR 22 2.0 (2) MSRP: $20.00
#14119 MIP Pucks™, CVD Axle, TLR 22 2.0 (2) MSRP: $20.00
#99002 HW-Bearing, 1/16 Ch Steel Ball (8) MSRP: $3.50
#99010 HW-Nut, M4 x .7mm Steel Locknut (6) MSRP: $3.50
#99015 HW-Pin, 1/16 x 3/8 Roll Pin (8) MSRP: $3.00
#99021 HW-Pin, 3/32 x 3/8 Roll Pin (8) MSRP: $3.00
#99026 HW-SHCS, 2-56 x .92 Diff Screw (2) MSRP: $3.00
#99028 HW-SHSS, 4-40 x 3/32 Cup Point (4) MSRP: $3.00
#99064 HW-BHCS, 1-72 x 1/8 (6) MSRP: $3.50

________________________________________________________________________

#14245 MIP Pucks™, 17.5 Drive System, TLR 22-2.0
MSRP: $95.00
UPC: 691545142456

PRODUCT DESCRIPTION:
“MIP Pucks™” ‘ARE’ the future of 17.5 stock racing! MIP’s all new Puck™ Drive system is an aluminum based drivetrain system which includes aluminum diff outdrives, aluminum C-CVD™ bones, and replaceable plastic orange wear Pucks™ that take the place of inferior steel pins. This combination greatly increases the longevity of the drivetrain and most importantly decreases the drivetain’s overall rotating mass by a whopping 50%! The decrease in weight directly results in quicker acceleration, deceleration, and lower motor temps! Get the advantage that every stock racer craves! GET, MIP’s all new Hard Anodized 7075-T6 Aluminum Puck drive system!

TARGET CUSTOMERS:
17.5 Stock Racers

COMPETITIVE ADVANTAGES:
Less rotating mass
Quicker acceleration
Quicker deceleration
Lower motor temps
Less overall wear on drive components.

FEATURES:
Complete MIP Differential
Complete C-CVD™ Axle Set
50% less rotating mass over stock steal components
Replaceable Pucks to keep your drivetrain fresh
Two sets of holes in the C-CVD™ bell
Hard Anodized 7075-T6 Aluminum
Race proven C-CVD™ Construct
100% Quality made in the USA!

INCLUDES:
MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), MIP Instruction Sheet (1), Bearing 3/32” Chrome Steel Ball (14), Bearing 1/16” Chrome Steel Ball (7), #2 Hardened Washer (1), MIP Thrust Retainer (1), Diff Lube & Grease Cup (1), ¼” x 9/32” Diff Spring (1), 2-56 x .925 Shoulder Diff Screw (1), T-Nut (1), Diff  Thrust Cover (1), MIP Lite Drive Male Outdrive(1), MIP Lite Drive Female Outdrive (1), SHSS,  4-40” x 3/32” Cup Point (2), 1/16” x .430” Solid Pin (2), 1/16” x 3/8” Roll Pin (2), M4 x .7mm Steel Locknut (2), BHCS 1/72 x 1/8” Button Head (6), MIP 3/16” CVD™ Coupling (2), MIP Lube & Thread Gel Cup (1), MIP Retaining Ring C-CVD™ (2), MIP Bearing Spacer Front (2), MIP CVD Puck Pin (2), MIP Outdrive Puck (8), MIP Alum. Lite C-CVD™ Bone (2), MIP CVD™ Axle TLR 22 2.0

REQUIRES:
.050 Allen Key – (Suggest – #9000 MIP Hex Driver Wrench .050 inch)
2.0mm Allen Key- (Suggest – #9008 MIP Hex Driver Wrench 2.0mm)

COMPATIBILITY:
TLR22 2.0 (TLR03002)

SUPPORT PRODUCTS:
#9149 HW-Bearing, 3/32” Chrome Steel Ball (12) MSRP: $2.50
#10144 MIP C-CVD™ Rebuild Kit, w/Set Screws MSRP: $6.00
#11115 MIP Capture Rings (4) for all 1/10 MIP CVD™ MSRP: $6.00
#12169 MIP Super Diff Rings, TLR 22/22T/22SCT MSRP: $5.00
#13131 MIP Pucks™, Orange No.1 Pucks (8) MSRP: $6.00
#13132 MIP Pucks™, No.1 Pins & Screws (2) MSRP: $8.00
#13147 MIP Pucks™, Male Aluminum Outdrive, TLR 22/22T/22 SCT MSRP: $10.00
#13148 MIP Pucks™, Female Aluminum Outdrive, TLR 22/22T/22 SCT MSRP: $10.00
#13149 MIP Pucks™, Thrust Rebuild Kit, TLR 22/22T/22 SCT MSRP: $12.00
#13156 MIP Pucks™, MIP C-CVD™ Aluminum Bone, TLR 22 Buggy (1) MSRP: $10.00
#14119 MIP Pucks™, CVD™ Axle, TLR 22 2.0 (2) MSRP: $20.00
#99002 HW-Bearing, 1/16 Chrome Steel Ball (8) MSRP: $3.00
#99010 HW-Nut, M4 x .7mm Steel Locknut (6) MSRP: $3.50
#99015 HW-Pin, 1/16 x 3/8 Roll Pin (8) MSRP: $3.00
#99016 HW-Pin, 1/16 x .430 Solid Pin (4) MSRP: $3.00
#99028 HW-SHSS, 4-40 x 3/32 Cup Point (4) MSRP: $2.50
#99029 HW-SHSS, 4-40 x 1/8 Flat point (10) MSRP: $3.00
#99064 HW-BHCS, 1-72 x 1/8 (6) MSRP: $3.50