MIP Pucks™ Drive System, Center for SCTe

Lighter…faster!! Introduced in MIP/Matt Olson’s TQ/Winning Set-up!

PRODUCT DESCRIPTION:

MIP Pucks™ Drive System, Center, TLR SCTE 2.0, MIP Pro4mance™ Pack  is a low rotating mass center drive system made from 7075-T6 Aluminum. This drive system removes half the weight out of the rotating mass, this result in higher acceleration and deceleration. The New MIP Pucks™ Drive System is a 10th degree ninja master – whisper quiet with no backlash!  With these New MIP Pucks™ Drive System you can sneak up on a cheetah and then out run it down the field!!!

MIP part 13120

TARGET CUSTOMERS:

RC Racer Enthusiasts who needs RC high-end performance parts.

 

COMPETITIVE ADVANTAGES:

The MIP Pucks™ Drive System, Center, TLR SCTE 2.0, MIP Pro4mance™ Pack is for the RC racers who need the competitive advantage of added speed and acceleration and quicker deceleration.

 

FEATURES:

  • Takes half of the weight out of the center drive system
  • Whisper quiet drive system that removes the noise from your drive train
  • A real tight drive system with no back lash
  • Higher acceleration & deceleration rates
  • Made from hard-anodized 7075-T6 Aluminum
  • Laser badged with MIP’s approval!
  • 100% Quality made in the USA!

 

INCLUDES:

MIP Center Diff Aluminum Outdrive  Losi Ten-SCTE (2), MIP Aluminum Lite C-CVD™ Bone Long Losi Ten-SCTE (1), MIP Aluminum Lite C-CVD™ Bone Short Losi Ten-SCTE (1), MIP Center Input Hub Losi Ten-SCTE (2), HW-BHCS 1-72 x 1/8 (6), MIP Keyed Drive Puck Ten-SCTE (8), MIP Keyed Drive Pin C-Drive Ten-SCTE (2), MIP Capture Rings C-CVD™ (2), MIP 3/16” CVD™ Coupling (2), HW-Pin 1/16 x .430 Solid Pin (2), HW-SHSS 4-40 x 3/32 Cup Point (2), HW-SHSS 8-32 x 1/8 Cup Point (2), MIP Lube & Thread Gel Cup (1), MIP Confetti Sticker (2)

 

REQUIRES:

.050 Allen Key – Equivalent to #9000 MIP Hex Driver Wrench .050 inch

1/16 Allen Key – Equivalent to #9001 MIP Hex Driver Wrench 1/16 inch

5/64 Allen Key – Equivalent to #9002 MIP Hex Driver Wrench 5/64 inch

 

COMPATIBILITY:

TLR SCTE 2.0, MIP Pro4mance™ Chassis

 

SUPPORT PRODUCTS:

#13121 MIP Pucks™, Orange No.2 Pucks (8) MSRP: $6.00 MAP: $4.50 UPC: 691545131214

#13122 MIP Pucks™, Orange No.2 Pins (2) MSRP: $7.50 MAP: $5.63 UPC: 691545131221

#13123 MIP Pucks™, Center Outdrive, TLR SCTE (1) MSRP: $10.00 MAP: $7.50 UPC: 691545131238

#13124 MIP Pucks™, Center Bone Long, TLR SCTE (1) MSRP: $12.00 MAP: $9.00 UPC: 691545131245

#13125 MIP Pucks™, Center Bone Short, TLR SCTE (1) MSRP: $12.00 MAP: $9.00 UPC: 691545131252

#13126 MIP Pucks™, Center Input Hub, TLR SCTE (1) MSRP: $12.00 MAP: $9.00 UPC: 691545131269

#10144 MIP C-CVD™ Rebuild Kit, w/Set Screws MSRP: $6.00 MAP: $4.50 UPC: 691545101446

#11115 MIP Capture Rings (4) for all 1/10 MIP CVD™ MSRP: $6.00 MAP: $4.50 UPC: 691545111155

#99016 HW-Pin, 1/16 x .430 Solid Pin (4) MSRP: $3.00 MAP: $2.25 UPC: 691545990163

#99028 HW-SHSS, 4-40 x 3/32 Cup Point (4) MSRP: $2.50 MAP: $1.88 UPC: 691545990286

#99031 HW-SHSS, 8-32 x 1/8 Cup Point (8) MSRP: $3.50 MAP: $2.63 UPC: 691545990316

#99064 HW-BHCS, 1-72 x 1/8 (6) MSRP: $3.50 MAP: $2.63 UPC: 691545990644

 

Download instructions at http://www.miponline.com/store/media/myinstruct/mip-inst-13120.pdf

Both comments and pings are currently closed.

Comments are closed.

Powered by WordPress