Onto the arms! Above are the front arms.

Durango uses droop screws on their suspension. Here you see me threading in the large set screw that is used to set droop in the front arms. Be careful while threading these in. The plastic is stiff and takes a little elbow grease to get them started.

No E clips! The front hing pin hole is covered on one side of the arm  so the pin doesn’t slide out.

Here is where I stand at the moment. Front arms installed. The next step I’ll be putting on the bumper.

Here is the front bumper installed on the truck. Check out where the two posts go into the shock tower.

The bumper posts stick out from the back of the front tower. Notice the little plastic clips that keeps the posts from backing out of the tower.

When you hit something the bumper will flex in and the post will slide through the tower to help absorb the impact instead of putting the force directly onto the tower. Pretty cool.