Axial SCX10 Honcho Kit Build

There are mounts for the nerf bars that get screwed to the outside of the frame rail. The screw is used on the inside of the frame rail to attach the upper suspension links

The lower suspension links get attached to the to transmission mount

Connect the driveshafts to the output drives of the transmission. Just like on the axle, we use a little bit of blue thread locker on the tiny grub screw.

There is a small bushing that goes on the screw, then the shock gets attached to the upper shock tower

Here is the assembled chassis, with the axles attached

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Both comments and pings are currently closed.

Comments are closed.

Powered by WordPress